Rod Chedister, Author at OCmodshop.com

DIY Heatcore: Inexpensive and Great Performance

Rod ChedisterJun 2, 2010September 12, 20141

With the heat levels produced by most modern processors, watercooling is gaining more and more attention in the mainstream cooling gear market. Of course, the

Case Cleaning 101

Rod ChedisterFeb 23, 2010September 12, 20140

We also have another guide about cleaning up your case here. There is nothing wrong with leaving spills, dirt, and stains on your computer case.

Ewido anti-malware

Rod ChedisterMay 17, 2006November 28, 20140

If you haven’t tried it or don’t have it, go get it. It is a kickass prog and worth every penny x 10. It found

Watercooling Basics/General Info/Explanation

Rod ChedisterNov 5, 2005November 28, 20140

Watercooling Basics/General Info/Explanation of some of the things in my previous post… H2O basics – Pre-built, H2O kits, external setups, do-it-yourself, etc. Pre-built

Don't Rule out Evercool WC-202

Rod ChedisterNov 3, 2005November 28, 20140

Dracos said… Danger Den is great stuff, but don’t rule out kits like the Evercool Wc-202.. I had a DD kit in mine, but

Danger Den DD12V-D4 Water Cooling Pump Review

Rod ChedisterMay 16, 2005July 26, 20140

As we have stated in past reviews of their products, Danger Den is one of the most respected names in the water cooling arena. While

Arctic Silver ArctiClean Review

Rod ChedisterApr 15, 2005July 27, 20140

Arctic Silver, the manufacturer of Arctic Silver 5, Ceramique and Arctic Alumina thermal compounds as well as Arctic Silver and Arctic Alumina thermal adhesives, recently

RBX/TDX Nozzles

Rod ChedisterFeb 24, 2005November 28, 20140

I just realized that I could update that to help some out with the RBX/TDX nozzles a bit – I need to go back and

AkwaFlo RAM Cooler Review

Rod ChedisterFeb 22, 2005July 26, 20140

As of late, there seems to be a distinct split in the water cooling field. One half consists of those trying to hit the absolute

Danger Den RBX Waterblock Review

Rod ChedisterFeb 20, 2005July 27, 20140

Danger Den is one of the most respected names in water cooling and I normally jump on any new product from them as soon as

Making shrouds

Rod ChedisterFeb 2, 2005November 28, 20141

I used to make all of my shroud by hand but now they are CNC machined. I have a partner in Canada – we started

So Much Needs to be Dremeled

Rod ChedisterJan 20, 2005November 28, 20140

John-Erik Christensen said… Because so much needs to be dremeled anymore … Rod, you know if you had carte blanche on a PC that had

I don't worry about chipset cooling

Rod ChedisterDec 22, 2004November 28, 20140

The only time I really worry about chipset cooling is if I have done voltage mods on the board and I am running everything at

Shroud Increases Performance

Rod ChedisterDec 10, 2004June 21, 20140

A shroud increases performance by reducing or removing the dead spot that occurs directly underneath the center hub of a fan. If you mount a

DangerDen Watercooling Fillport Review

Rod ChedisterOct 5, 2004July 26, 20140

Yes we have another review for a Danger Den product, by now I don’t even need to tell you that Danger Den is one of