Motherboard Archives - Page 3 of 4

Thermalright SLK-800U Heatsink Review

Alan McCloskeySep 14, 2004July 25, 20140

Thermalright has been a producer of high-quality copper heatsinks for quite a few years. Greater heat generation of the latest processors has resulted in the

GeIL Ultra Platinum PC4000 Dual Channel Memory Review

BrandonJul 26, 2004July 25, 20140

GeIL has grown to be one of the larger RAM manufactures these days. They mainly cater to overclockers and gamers with their fast memory. They

Albatron K8X800 Pro II Motherboard Review

BrandonJun 9, 2004July 26, 20140

The K8T800 is Via’s newest edition to their long line of AMD chipsets. Albatron has taken this chipset and used it in their new K8X800

Fush Zero Case Project – Part 2

Guest WriterFeb 2, 2004July 26, 20140

If you have not already read the first article about this Fush Zero project please do so by clicking here. From this point on, planning

Albatron KM18G Pro Motherboard Review

BrandonJan 11, 2004July 26, 20142

I recently reviewed an Abit NF7-S Rev 2.0 and was really impressed with it. This motherboard is also a nForce 2 based motherboard however this

Corsair TWINX1024-3200LL Memory Review

BrandonDec 23, 2003July 26, 20140

Corsair sent me a dual channel memory kit of their PC3200, specifically the TWINX1024-3200LL. This memory kit consists of two CMX512-3200LL 400MHz ultra-low-latency memory modules

Globalwin Sapphire 520w PSU Review

BrandonOct 30, 2003July 26, 20140

Globalwin has come out with their first series of power supplies which they have named Sapphire. These power supplies come in either a 420w or520w

Enermax Xpoint CS-528 Case Review

Guest WriterJul 15, 2003July 20, 20140

Enermax is a company that has been around a long time making PC power supply units, and great ones at that. It was only a

Koolcase Matrix Case Review

Alan McCloskeyJun 28, 2003July 20, 20140

This would be a decent case if competing in the $30 category, but the extra features that justify a higher price are just poorly implemented.

Abit NF7-S Revision 2 Motherboard Review

BrandonJun 5, 2003July 20, 20140

This motherboard is the NF7-S rev 2.0 which is the newest revision, revision 2.0 features the new crush 18D nvidia chipset which should allow for

Enermax CS-5866 Case Review

Alan McCloskeyMay 7, 2003July 20, 20140

As the modding scene has grown from enthusiastic Dremmel freaks to manufacturers, customized products are becoming commonplace. These pre-modded products can now be found in

OCZ Dominator 2-Cu Heatsink Review

BrandonMay 7, 2003July 20, 20140

I recently reviewed the OCZ Gladiator II that OCZ sent over. This review is on the second heatsink they sent along which is the OCZ

AOpen AX4PE Max Motherboard Review

Alan McCloskeyApr 1, 2003July 20, 20140

The Pentium 4 scene has changed several times since the chip was first introduced. Some of these changes caused many users to stray to AMD’s

MSI K7D Master-L Motherboard Review

BrandonJan 15, 2003July 20, 20140

The reason I am reviewing this motherboard is because my hosting company was not able to meet my needs so I decided to build my

EPoX 8K9A2+ Motherboard Review

BrandonJan 14, 2003July 20, 20140

I have always been a fan of EPoX motherboards and have used them a lot because of their stability, features, and overclockability. I reviewed the