After some carefull web surfing and countless hours of drawing and shopping, I had the makings of my future system. Though instead of letting my backside recover from the planning process, my components were chosen and work had to begin. Though I believe all of you reading this deserve to be let in on some of the hardware and planed specifics that will be used in my system that I call Fush Zero.
System Cooling
Water cooling for the Northbridge chipset and Graphics; consisting of an Eheim 1048 pump, Danger Den z-chip and GF4 copper blocks, a Danger Den acrylic reservoir and a Black Ice Extreme Radiator. The system will be closed loop with ½” inner diameter chemical grade Tygon tubing.
CPU Cooling
Vapor phase change cooling for the CPU; consisting of an Asetek Vapochill PE unit that will be heavily modified (more on this later).
Case Construction
The main case again will consist of the Lian Li PC6085 boasting enough changes to make it truly unique. In addition the Vapochill PE unit will be housed in a brand new separate case underneath the Lian Li. The separate Vapochill case will be fabricated from scratch utilizing an aluminum frame with acrylic sides and aluminum accents. The Lian Li and Vapo case will then be joined to form a single unit. In the end, the overall look of the two cases together must emphasize clean lines and uniformity. The challenge being, how to make a scratch built case blend well with a sleek Lian Li case to achieve that part of my vision for an overall eyecatching style.
